Renewing dipped beam bulb: Audi TT Mk1

🧭 Before you start

Fits: Audi TT Mk1 (8N)

Don't miss

• Insert new dipped beam bulb in headlight housing; do not touch glass part of bulb with bare hands.

📋 Procedure

1. Switch off ignition and take out ignition key.
2. Turn light switch to position "“0”".
3. Remove cover (front left) (arrows).
4. Unscrew bolt (1) and remove cover over expansion tank (arrow).
5. Remove housing cover (11) from headlight housing (1).

6. Unplug electrical connector at dipped beam bulb.
7. Release retaining clip and take dipped beam bulb out of headlight housing.
8. Insert new dipped beam bulb in headlight housing; do not touch glass part of bulb with bare hands.
9. Secure bulb in headlight housing with retaining clip.
10. Plug in connector and close housing cover.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• 2.7/3.0TDi (CGKA,CGKB,CCWA, CCLA)
• Detaching refrigerant lines from condenser/re-attaching · 1 torque figures
• General body repairs, exterior — Central locking system · 1 torque figures
• Detaching and attaching air conditioner compressor at bracket, vehicles with 4-cyl. or 6-cyl. engine · 1 torque figures
• Detaching and attaching air conditioner compressor at bracket (mechanically driven air conditioner compressor) - vehicles with 4-cyl. engine · 1 torque figures