Removing slider for variable convertible roof compartment — AUDI

🧭 Before you start

Fits: Audi A4 Cabriolet B6/B7 (8H)

📋 Procedure

1. Remove variable convertible roof compartment .
2. Pull off floor covering (1) (convertible roof compartment lining) on relevant side to such an extent that the two bolts (2) can be accessed.
3. Remove bolts (2) (2x).
4. Separate centre section of convertible roof compartment (3) from right-side section (4).
5. Pull apart side sections (1) and (2).

6. Remove bolts (3) (4x) from inside lid.
7. Detach inside lid (1).
8. Unscrew bolts (1) (4x) on both sides.
9. Pull apart sections (1) and (4) upwards.
10. Prise slider (3) out of fastener of section (1).
11. Separate sections (1) and (4).
12. Unscrew bolts (2) on left and right.
13. Move slider (1) downwards out of fasteners.
14. Take out slider (1).

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing radioR, MMI – Audi A5 Cabriolet
• Removing and installing pop rivet nut for head restraint (rear)
• Removing and installing upper links (coil springs) – Audi
• Removing and installing shock absorber for coil springs – Audi
• Removing and installing brake pedal (LHD vehicles) – Audi