Removing seat with defective longitudinal adjustment motor — AUDI

🧭 Before you start

Fits: Audi A8 D3 (4E, 2002–2010)

Don't miss

• Ensure correct operation of the safety latch . — Install the front seat (1) in the reverse order of removal.

📋 Procedure

1. Detach the trim (12).
2. Unscrew the bolts (13) (4x).
3. Fold the seat (1) forwards.
4. Unscrew the bolts (14) (2x).
5. Unscrew the bolt (6).

6. Unclip the connector (5) from the retainer (4).
7. Unclip the connector (11) from the retainer (4).
8. Unfasten the wiring harness (9) at the clips (10) and (7).
9. Unplug the connector (8) at the seat longitudinal adjustment motor.
10. Take the backrest with seat pan out of the vehicle with the assistance of a second mechanic.
11. ⚠ Ensure correct operation of the safety latch . — Install the front seat (1) in the reverse order of removal.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Checking solenoid valve for boost pressure control -N75
• Removing and installing power-assisted steering box, RHD vehicles
• Removing and installing air conditioner unit
• Checking brake light switch -F or brake pedal switch -F47
• Installing hose kit and pipe/valve kit