Removing roof frame trim (from week 36.02 onwards): Audi A6 C5

🧭 Before you start

Fits: Audi A6 C5 (4B)

Don't miss

• Always keep to installation sequence for roof frame trim. — Carefully insert roof frame trim (1) under C-pillar trim (top).

📋 Procedure

1. ⚠ Observe safety precautions for working on airbags and curtain airbags . — Remove D-pillar trim .
2. Remove retainer for load guard at roof frame trim .
3. Remove B-pillar trim (top) .
4. Remove front and rear grab handle .
5. Unfasten A-pillar trim (top) .

6. Pull out roof frame trim under A-pillar trim .
7. Unscrew bolt (4) (1x).
8. Pull roof frame trim (1) out of door seal.
9. Pull out roof frame trim (1) under C-pillar trim (top).
10. Carefully detach roof frame trim (1).
11. ⚠ Always keep to installation sequence for roof frame trim. — Carefully insert roof frame trim (1) under C-pillar trim (top).
12. Install retainer for load guard at roof frame trim .
13. Insert roof frame trim with tether beneath A-pillar trim .
14. Fit bolt together with tether at joint with roof frame trim .
15. Screw in bolt (4) with tether (5).
16. Guide retaining tab of D-pillar trim (6) through opening at tether (5) into roof frame trim (1).
17. Perform remaining installation steps in reverse order of removal.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing rain and light sensor G397 – Audi
• Renewing brake caliper (2EA, 2EJ, GP1) – Audi Q3
• Removing and installing coolant pipe (right-side) on gearbox
• Removing and installing turbocharger - engine codes CRFA and CRFC
• Removing and installing exhaust gas recirculation cooler - engine codes CLHA, CRBC, CRBD, CRKB, CRLB, CUNA, CRLC, DBKA, CXXB, CRUA, DEJA, DEJB