Removing moulded headliner with sun roof — AUDI

Refer to coding on vehicles with encoded radio/radio navigation system (RNS); if necessary, interrogate.
Disconnect battery earthing strap/cable.

Moulded headliner
Removing:

Remove A-pillar trims => Page
70-49
.
Remove D-pillar trims => Page
70-66
.
Removing sun visor=>Page
70-104
.
Remove interior rear-view mirror => Page
68-74
.

Remove cover for sun roof motor
=> Page
70-106
.
On vehicles with head airbag: Remove both head airbags=> Page
69-141
.
Screw out bolts -Item 6-.
Carefully lever out trim surround -Item 12- out of fasteners -Item 13-.
Prise out rear interior light -Item 4-.
Tilt backrest of passenger's seat as far back as possible.
Tilt backrest of driver's seat as far back as possible.
A second person is required to support the moulded headliner.
Detach moulded headliner from fasteners -Item 11-.
Detach guard clip -Item 10- from roof => Fig.:
2
.

Pull moulded headliner forward and detach from clips -Item 2- at rear.

Clips -Item 2- remain in vehicle

Remove moulded headliner through one of the rear doors.

Retaining clip
3 off

Body
Rear interior light
Removing:

Insert screwdriver under side of interior light and lever out.
Unfasten wires and detach light.

Make-up mirror light
2 off
Removing:

Insert screwdriver under side of light and lever out.
Unfasten wires and detach light.

Bolt - 3 Nm
3 off

Centre sun visor
Sun visor
Removing and installing
=>Page
70-104

Cover for sun roof motor
Removing and installing
=>Page
70-106

Guard clip
2 off
Removing => Fig.:
2

Clamp
2 off

Masking frame
Prise out of fasteners -Item 13-

Clamp
14 off
Part of moulded headliner assembly

Fig.:2
Detaching guard strip from roof

Detach clips -Item 2- (2x).

1 -
Guard clip
Arrow points in direction of travel.

Notes:

After connecting the battery, please ensure that the vehicle accessories (radio, clock, electric window lifters) are checked according to workshop manual and/or operating instructions.

=> Electrical System; Repair group 27; Battery
Electrical System
Battery

If the fault warning light (K 75) for airbag signals a fault after assembly the fault memory must be erased and again be interrogated by using fault reader V.A.G 1551.

=> Body Self-diagnosis; Repair group 01
Body Self-diagnosis