Removing gearbox mounting - vehicles with 2.0 ltr. TFSI engine — AUDI

🧭 Before you start

Fits: Audi TT Mk2 (8J, 2006–2014)

Don't miss

• Take up weight of engine evenly with spindles; do not lift.

📋 Procedure

1. Remove engine cover panel (arrows).
2. Completely remove air cleaner housing 24Air cleaner; Exploded view - air cleaner housing.
3. Remove bolts (arrows) and detach bracket for air cleaner housing.
4. Set up support bracket10 - 222 A on wing mounting flanges.
5. Engage hook of spindle 10 - 222 A /11 in engine lifting eye (left-side).

6. Take up weight of engine evenly with spindles; do not lift.
7. Remove bolts (arrows).
8. Open retainers for wiring duct (arrows).
9. Cut open cable tie (1) and push electrical wiring to one side.
10. Unclip wiring duct.
11. Remove bolts (1) and detach gearbox mounting (A).

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing refrigerant pipe (B) (from connection at condenser to screw connection in refrigerant pipe)
• Injection and ignition system (8-cyl. 5-valve injection engine) — Removing and installing Lambda probes
• Removing and installing selector lever lock solenoid N110 on vehicles from 11.2005 onwards
• Adjusting selector lever cable on vehicles from 11.2005 onwards
• Checking tandem pump – Audi A6 C5