Removing and installing trim panel for B-pillar (rear door) — AUDI

🧭 Before you start

Fits: Audi Q7 (4M, 2015–)

📋 Procedure

1. Move door window to "“open”" position.
2. Remove window frame trim General body repairs, interior70Door trim (rear); Removing and installing window frame trim.
3. Pull window guide (5) out of trim panel for B-pillar (1).
4. Pull sealing lip (2) for window guide off bonded area on trim panel for B-pillar.
5. Remove bolts (arrows A).

6. Slide trim panel for B-pillar downwards (arrow B); lug (3) will be disengaged from door shell (4).
7. Pull trim panel for B-pillar towards front out of surrounding section and remove upwards from door.
8. Remove any residual adhesive with adhesive strip removerVAS 6349.
9. Clean bonding surface with cleaning solutionD 009 401 04.
10. Apply primerD 355 205 A2 to bonding surface using applicatorD 009 500 25 and allow to flash off.
11. Pull protective film off adhesive strip and attach trim panel for B-pillar.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and attaching pulley (without air conditioning system magnetic clutch N25), “Denso” air conditioner compressor, version “2”
• Exploded view - steering rack, track rods
• Removing and installing centre crash sensor for X/Y axis G858
• Gearbox adaption
• Exploded view - poly V-belt drive, vehicles up to model year 2013