Removing and installing trim panel for B-pillar on door: Audi A4 B8

🧭 Before you start

Fits: Audi A4 B8 (8K, 2007–2015)

📋 Procedure

1. Lower door window.
2. Remove window frame trim General body repairs, interior70Door trim (front); Removing and installing window frame trim.
3. Unfasten window guide in area of B-pillar from trim panel and lift out.
4. Unscrew bolts (4) and lift trim panel out of door.
5. When installing window guide in trim panel, coat guide in area with soap solution.

6. Remove door window .
7. Remove window frame trim General body repairs, interior70Door trim (rear); Removing and installing window frame trim.
8. Remove trim panel for B-pillar.
9. Unfasten window guide in area of B-pillar from trim panel and lift out.
10. Unscrew bolts (4) and lift trim panel out of door.
11. When installing window guide in trim panel, coat guide in area with soap solution.
12. Unfasten trim for door frame in area of C-pillar.
13. Unscrew bolt, push trim downwards out of fasteners and detach to side.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing charge air cooler - vehicles without hybrid drive
• Filling and bleeding fuel system - vehicles without hybrid drive
• Removing and installing catalytic converter - vehicles with hybrid drive
• Removing and installing gearbox end cover – Audi A6/A7 C7
• Removing and installing honeycomb filter (USA vehicles with recuperation)