Removing and installing top panel — AUDI

🧭 Before you start

Fits: platform codes S1, 2H

📋 Procedure

1. Remove right D-pillar trim .
2. Unscrew bolts (5) and remove load compartment light (4).
3. Separate electrical connector (6).
4. Unscrew bolts (3) (with spacers (2)) and (8).
5. Remove top panel (1).

6. Locate snap nut (7) in area of light aperture.
7. Locate top panel (1) on roof frame and pass connector for interior light through.
8. Align top panel and fasten to metal bracket in light aperture with bolt (8).
9. Position spacers (2) and screw bolts (3) into wooden rails.
10. Reconnect electrical connection (6) and insert load compartment light (4) in top panel recess.
11. Secure light with bolts (5).

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing oil return line for turbocharger, bi-turbo
• Removing and installing front side airbag with igniter, individual seat and double bench seat at front
• Removing and installing rear door trim, sliding door, Multivan
• Removing and installing movable section of sliding window, California
• Removing and installing front bonded rubber bush on gearbox carrier