Removing and installing seat cushion extension motor: Audi A8 D3

🧭 Before you start

Fits: Audi A8 D3 (4E, 2002–2010)

📋 Procedure

1. Remove the seat .
2. Attach the holder for seat repairVAS 6136 to the engine and gearbox holderVAS 6095.
3. Attach the front seat to the holder for seat repairVAS 6136.
4. Remove the side trim on the sill panel side .
5. Remove the side trim on the tunnel side .

6. Remove the front trim .
7. Remove the holder for the seat side trim panels .
8. Remove the backrest .
9. Remove the seat pan cover and padding .
10. Remove the belt buckle .
11. Unfasten the wiring harness and unplug the connectors from the seat pan and the seat cushion extension motor.
12. Drill out the rivets (1) (4x).
13. Replace the seat pan with seat cushion extension motor (3).
14. Install in reverse order.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing power steering pump (vehicles with 6-cyl. 2.7 ltr. and 3.0 ltr. TDI common rail engine)
• Removing and installing rear brake pads – Audi A8 D4
• Removing and installing rear brake caliper piston – Audi A8 D4
• Checking intake manifold pressure sender G71 and intake manifold temperature sender G72
• Installing repair kit for headlight housing, headlights with H4 bulb, vehicles as of model year 2011 · 1 torque figures