Removing and installing seat covers and padding — AUDI

🧭 Before you start

Fits: VW Caddy III (2K, 2004–2015); platform code 2C0

Don't miss

• The part numbers of the padding clips can be found in the Electronic Parts Catalogue.

📋 Procedure

1. Remove single seat or double seat bench .
2. Remove trims, backrest fittings .
3. Detach profiles (1), (2), (3) and (4) beneath seat.
4. Fold up cover at side and thread loop (5) through the opening in the cover.
5. Remove padding and cover from seat frame.

6. Remove front seat belt anchor .
7. Using a small screwdriver, press lateral mounting bridges (1) apart and pull out clamp rail (2).
8. Detach the remaining connections as described.
9. Detach cover (3) from padding (4).
10. Attach cover (3) to padding (4) with new padding clips at the positions indicated, using the padding clip pliersV.A.G 1634. [Note: The part numbers of the padding clips can be found in the Electronic Parts Catalogue.]

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing cylinder head – Audi A2 · 24 torque figures
• Removing and installing camshaft timing chains – Audi A6 C6 · 24 torque figures
• Installing gearbox – Audi A3 · 22 torque figures
• Timing chain covers - exploded view · 26 torque figures
• Removing and installing camshafts – Audi · 18 torque figures