Removing and installing seat belts of 3-person bench seat, Multivan — AUDI

🧭 Before you start

Fits: VW Transporter T5 (7H), VW Transporter T5 (7J), VW Transporter T6 (7E), VW Transporter T6 (7F)

📋 Procedure

1. Move 3-person bench seat to foremost position.
2. Remove side panel trim from 3-person bench seat .
3. Remove seat belt end fittings .
4. Loosen backrest cover and padding of 3-person bench seat .
5. Using a small screwdriver, lever out spreader pins (1) (Qty. 3).

6. Using a small screwdriver, lever out spreader rivets (2) (Qty. 3).
7. Fold out rear panel trim (3) until bolts securing seat belts are accessible.
8. Unscrew bolt (4) and remove right belt inertia reel (9) from backrest frame.
9. Unscrew bolt (5) and remove centre belt inertia reel (8) from backrest frame.
10. Unscrew bolt (6) and remove left belt inertia reel (7) from backrest frame.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing bracket for control motor V427 / V443
• Removing and installing evaporator in front heater and air conditioning unit
• Removing and installing heater and air conditioning unit, "“Mid”" or "“Mix”" air conditioner
• Removing and installing heated windscreen control unit J505
• Removing and installing burner element – Audi A6/A7 C7