Removing and installing roof trim strip - Sportback with high-gloss package — AUDI

🧭 Before you start

Fits: Audi A3 (8V, 2012–2020); platform code 85

• Special tools named: T10383/1

📋 Procedure

1. Open front and rear doors.
2. Mask area around roof trim strip at A-pillar with adhesive tape (2) (as shown) to avoid damaging paintwork.
3. Starting at A-pillar, press roof trim strip (1) off retaining clips (arrow) using wedge T10383/1.
4. Pull roof trim strip (2) out of clips (1) in area of rear side window.
5. Have a second mechanic hold the roof trim strip to avoid damaging the paintwork.

6. Mask area around trim strip for side window with adhesive tape (3) (as shown) to avoid damaging paintwork.
7. Pull roof trim strip (2) out of clip on side window (1) in direction of (arrow).
8. Detach roof trim strip.
9. Fit roof trim strip (1) in trim strip (7) for side window.
10. Insert guide pin (4) of roof trim strip into clip mounting (3) in roof of vehicle.
11. Press roof trim strip into clips in area of side window and onto retaining clips (2) so they engage audibly.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing injectors (piezo injectors) – Audi BJJ · 1 torque figures
• Servicing refrigerant circuit
• Renewing oil seal for selector shaft – Audi A6 C6 · 1 torque figures
• Removing and installing poly V-belts – Audi · 2 torque figures
• Checking charge pressure control solenoid valve N75 – Audi