Removing and installing rear outer belt end fitting — AUDI

🧭 Before you start

Fits: platform codes SF, SG

📋 Procedure

1. Remove front trim of individual seat in 2nd row.
2. Remove rear trim of individual seat in 2nd row.
3. Remove left trim of individual seat in 2nd row.
4. Remove bolt (4).
5. Remove belt guide (3) from seat frame.

6. Gently pull seat belt out of belt guide.
7. Remove bolt (2).
8. Detach belt end fitting (1) from seat.
9. Remove rear trim of 3-seat bench seat.
10. Fold seat padding (1) forwards.
11. Remove bolt (5).
12. Remove left belt end fitting (4), centre belt end fitting (3) as well as spacer (2).
13. Remove bolt (6).
14. Remove belt end fitting (7), centre belt buckle (9) with cover plate (8) and spacer (10).

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing servo motor with control unit – Audi
• Removing and installing left turbocharger – Audi A8 D2 3.3 TDI
• Removing and installing right turbocharger – Audi 3.3 TDI AKF
• Removing and installing digital sound package control unit J525 (Standard) (from model year 2006 onwards, up to week 35/08) · 1 torque figures
• Removing and installing satellite radio R146 (up to model year 2005) · 1 torque figures