Removing and installing rear brake hoses — AUDI
Removing and installing rear brake hoses on Audi: 10 steps. What to remove, in what order, and what to check after.
Workshop procedure for AUDI — the exact step sequence and torque figures, straight from real workshop data.
🧭 Before you start
Fits: VW Caddy III (2K, 2004–2015); platform code 2C0
- Opens: brake fluid
📋 Procedure
- Connect bleeder bottle hose to brake caliper bleed valve and open bleed valve.
- Apply brake pedal depressorV.A.G 1869/2.
- Close bleed valve and remove bleed bottle.
- Detach brake hose (1) from bracket (2).
- Release brake line (1).
- Pull off clips (2).
- Pull brake hose out (3).
- Install brake hose in reverse order; secure in position with clip to prevent twisting.
- Remove brake pedal depressorV.A.G 1869/2.
- Bleed brake system .
Other AUDI procedures
- Removing and installing toothed belt – Audi · 56 torque figures
- Removing engine – Audi A8 D3 · 41 torque figures
- Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
- Installing engine – Audi A8 D4 · 36 torque figures
- Removing and installing camshaft timing chain · 29 torque figures
- Removing and installing Bowden cable for flap for convertible roof frame
- Removing and installing motor for luggage compartment cover
- Removing and installing sunroof sun blind – Audi A4 B9
- Removing fuel tank - TFSI vehicles – Audi A4 B9
- Removing fuel tank - TDI vehicles – Audi A4 B9
Who makes these pages, and how
TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.
The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.
Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.
Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com
The story behind TorqFix →Workshop data on this page last updated 20 Sep 2026.