Removing and installing lock carrier - vehicles from model year 2015 onwards — AUDI

🧭 Before you start

Fits: Audi A6/A7 C7 (4G, 2011–2018)

📋 Procedure

1. Remove noise insulation (front) .
2. Remove impact bar .
3. Remove headlights Electrical system94Headlights; Removing and installing headlights.
4. Remove radiator with radiator cowl 19Radiator/radiator fans; Removing and installing radiator.
5. Remove bolt (3).

6. Unplug electrical connectors (1 and 2).
7. Unplug electrical connector at crash sensor for front airbag (observe safety precautions General body repairs, interior00Safety precautions; Safety precautions when working on pyrotechnic components).
8. If fitted, unplug electrical connector (4) for secondary air pump motor V101.
9. Press release tabs and disconnect secondary air hoses (1) and (2).
10. Detach bonnet lock cable at coupling unit and move clear at lock carrier . [Note: Ignore (item 3).]
11. Remove bolt (2).
12. Have a second mechanic hold lock carrier (1) in position and unscrew bolts (3, 4 and 5).
13. Detach lock carrier with mountings for impact bar with help of second mechanic.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing trailing arm with mounting bracket (front-wheel drive)
• Removing and installing backrest release mechanism (front bucket seat)
• Removing and installing fuel delivery unit/fuel gauge sender (front-wheel drive)
• Removing and installing shift unit - vehicles from 11.2009 onwards
• Removing bevel box - vehicles with 3.2 ltr. MPI engine – Audi