Removing and installing hinged pocket: Audi A6 C5

🧭 Before you start

Fits: Audi A6 C5 (4B)

📋 Procedure

1. Remove door trim (see the separate procedure).
2. Remove hinged pocket assembly (see the separate procedure).
3. Disengage spring (1) from guide (2).
4. Disengage spring (1) from guide (2).
5. Working from inside, use screwdriver to press pin (1) outwards as far as it will go.

6. Use long-nose pliers to pull out pin (1).
7. Working from inside, use screwdriver to press pin (1) outwards as far as it will go.
8. Use long-nose pliers to pull out pin (1).
9. Use screwdriver to lever out guide pins (1) on left and right.
10. Remove hinged pocket from mounting.
11. When installing, engage toothed wheel (1) in teeth (2).

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing over-centre spring, mounting bracket for clutch pedal installed
• Installing and adjusting front door · 1 torque figures
• Removing and installing vane pump, 5-cylinder diesel engine
• Removing wiper frame with linkage and wiper motor · 1 torque figures
• Removing and installing curtain airbag in front passenger compartment, Multivan