Removing and installing front left chest vent temperature sensor G385 — AUDI

🧭 Before you start

Fits: Audi Q7 (4L, 2005–2015)

• Special tools named: VAS 5051

Don't miss

• To ensure that the front left chest vent temperature sensor G385 has no play in the mount (E), an O-ring (D) is fitted.

📋 Procedure

1. Remove the dash panel General body repairs, interior70.
2. Remove retaining plate with control motors V108 and V158.
3. Remove retaining plate with control motors V107, V299 and V110.
4. Unplug the connector (B) from the front left chest vent temperature sensor G385(A).
5. Give the front left chest vent temperature sensor G385(A) an approx. 90° turn in direction of arrow.

6. Take front left chest vent temperature sensor G385(A) out of air conditioning unit.
7. Check the O-ring (D) for damage and correct positioning.
8. Insert front left chest vent temperature sensor G385(A) correctly in mounting (E) for air conditioning unit. [Note: To ensure that the front left chest vent temperature sensor G385 has no play in the mount (E), an O-ring (D) is fitted.]
9. Plug in the connector (B) at the front left chest vent temperature sensor G385(A) and check the routing of the wire (E).
10. Install retaining plate with control motors V107, V299 and V110.
11. Install retaining plate with control motors V108 and V158.
12. Re-install remaining components in reverse order of removal.
13. Interrogate fault memory of front operating and display unit (Climatronic control unit J255) and erase any faults displayed Guided Fault Finding function of vehicle diagnostic, testing and information system VAS 5051.
14. Perform basic setting and final control diagnosis for air conditioner Guided Fault Finding function of vehicle diagnostic, testing and information system VAS 5051.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing camshafts - cylinder head (left-side)
• Removing gearbox - vehicles with 4-cylinder TFSI engine – Audi
• Removing and installing coolant pipe (top left) – Audi A8 D4
• Removing and installing hybrid battery unitAX1 – Audi A3 · 1 torque figures
• Checking fuel pressure and residual pressure – Audi 4.2