Removing and installing four-way lumbar support - old version — AUDI

🧭 Before you start

Fits: Audi A6 C6 (4F, 2004–2011)

📋 Procedure

1. Remove seat .
2. Attach seat repair standVAS 6136 to engine and gearbox supportVAS 6095.
3. Attach front seat to seat repair standVAS 6136.
4. Remove backrest .
5. Remove backrest cover panel .

6. Use screwdriver to prise out fastening strips (9) (3x).
7. Drill out rivet (8).
8. Prise out fastening strips (11) (2x).
9. Disengage four-way lumbar support (4) (top left and right) from outer backrest frame.
10. Thread Bowden cable (3) out of support -5-.
11. Disengage Bowden cable (10) from four-way lumbar support (4) at hook (2).
12. Disengage Bowden cable (10) from retainer (1).
13. Take out four-way lumbar support (4).

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing fuel tank – Audi Q3
• Exploded view - valve gear · 5 torque figures
• Removing gearbox - vehicles with 1.4 ltr. TFSI engine (EA211), from model year 2015 onwards
• Removing and installing fuel tank with attached components
• Replacing heat exchanger of rear air conditioning unit – Audi