Removing and installing DVD player R7: Audi A8 D3

🧭 Before you start

Fits: Audi A8 D3 (4E, 2002–2010)

Don't miss

• Insert two radio release tools T10057 into slots on DVD player R7 until they engage. Pointed ends of grips must face outwards.

📋 Procedure

1. Switch off all electrical equipment.
2. Remove ignition key.
3. Open glove box.
4. Insert two radio release tools T10057 into slots on DVD player R7 until they engage. Pointed ends of grips must face outwards.
5. Pull DVD player R7 out of mounting frame.

6. Unplug all connectors at DVD player R7.
7. Fit protective cap for cable connectorVAS 6223/9(1) onto MOST bus connector (2).
8. Pull out radio release tool T10057 by pressing retaining tabs on DVD player R7.
9. Plug in all connectors.
10. Slide DVD player R7 into mounting frame until it engages.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Checking delivery pressure of power steering pump (vehicles with V8 FSI engine)
• Removing and installing intake manifold (bottom section, left-side) - vehicles with engine codes BUG and BUN
• Removing side window – Audi Q7
• Removing and installing sealing flange – Audi Q7 3.6 BHK/BHL
• Removing and installing left heat regulation valve N175 and right heat regulation valve N176