Removing and installing digital TV tuner, from model year 2013 onwards — AUDI

🧭 Before you start

Fits: Audi A4 B8 (8K, 2007–2015)

📋 Procedure

1. Switch off ignition and all electrical equipment and remove ignition key.
2. Open left storage compartment in luggage compartment.
3. Release and unplug connectors at digital sound package control unit J525.
4. Fit protective cap for cable connectorVAS 6223/9(1) onto MOST bus connector (2).
5. Unscrew nuts (1) and bolts (3) from bracket (2) and lift bracket with digital sound package control unit J525(2) into luggage compartment.

6. Release and unplug connectors on digital TV tuner.
7. Fit protective cap for cable connectorVAS 6223/9(1) onto MOST bus connector (2).
8. Unscrew bolts (arrows) at digital TV tuner (1).
9. Remove digital TV tuner (1) from rack (2).
10. Install in reverse sequence of removal.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• 6-cylinder direct injection engine with supercharger (3.0 ltr. 4-valve TFSI), mechanics — Separating engine from automatic gearbox 09L · 1 torque figures
• Removing and installing starter - vehicles with 6.3 ltr. FSI engine
• Draining and filling cooling system - vehicles with hybrid drive
• Removing and installing fuel pressure regulating valve N276/N484 · 2 torque figures
• Audi 3.0 TDI gearbox removal & installation