Removing and installing coolant pipes (top front) — AUDI

🧭 Before you start

Fits: VW Caddy IV (SA, 2015–2020)

• Opens: coolant

Don't miss

• Secure all hose connections with the hose clips corresponding to original equipment Electronic Parts Catalogue (ETKA).

🔧 Engine codes this applies to

📋 Procedure

1. Unscrew bolts (1) and (3).
2. Release catch (arrow).
3. Remove cover (2).
4. Detach coolant hose (2).
5. Release catches (arrows).

6. Remove intake air duct (1).
7. Unscrew bolts (1).
8. Unclip air duct (2), and remove it.
9. Drain coolant .
10. Unclip bracket (1).
11. Remove bolts (arrows).
12. Loosen clip (3).
13. Pull off coolant hose.
14. Unscrew bolts (1) and (2).
15. Loosen clamps (arrow).
16. Pull off coolant hoses.
17. Detach coolant pipes (top front). [Note: Secure all hose connections with the hose clips corresponding to original equipment Electronic Parts Catalogue.]
18. Replenish coolant .

Other AUDI procedures

• Audi RS5 ancil belt removal
• Checking fuel gauge sender 2G169 - A5 from model year 2012 onwards, A4 from model year 2013 onwards, rest-of-world vehicles with four-wheel drive, USA vehicles with front-wheel drive/four-wheel drive
• Removing and installing fuel filter - A5 up to model year 2011, A4 up to model year 2012
• Checking combination valve for correct operation and leaks
• Removing and installing Lambda probe – Audi R8
• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures