Removing and installing centre bumper cover mounting — AUDI

🧭 Before you start

Fits: platform code 42

📋 Procedure

1. Remove bumper cover (centre section) .
2. Remove bumper cover (rear) .
3. Unplug electrical connector for spoiler for rear lid.
4. Detach electrical connector from bracket.
5. To do so, press catch in direction of (arrow A) and pull electrical connector (1) out of bracket (2) in direction of (arrow B).

6. Remove bolts (arrows).
7. Detach centre bumper mounting (1), simultaneously guiding out electrical connector for spoiler for rear lid.
8. Adjust centre bumper cover mounting Gap widths at bumper cover (rear).
9. Install bumper cover (rear) .
10. Install bumper cover (centre section) .

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing engine cross member – Audi Q7
• Tightening torques - bracket for bevel box – Audi TT Mk2 · 5 torque figures
• Removing and installing self-locking centre differential · 2 torque figures
• Removing and installing curtain airbag (Avant) – Audi A4 B6/B7 · 1 torque figures
• Audi 2.7 gearbox removal & installation · 2 torque figures