Removing and installing CD changer R41/CD player R89: Audi A8 D3

🧭 Before you start

Fits: Audi A8 D3 (4E, 2002–2010)

Don't miss

• Insert two radio release tools T10057 into slots on CD changer R41 until they engage. Pointed ends of grips must face outwards.

📋 Procedure

1. When renewing control unit, select "“Replacement”" function for appropriate control unit in "“Guided Fault Finding”".
2. Switch off all electrical equipment.
3. Remove ignition key.
4. Open glove box.
5. Insert two radio release tools T10057 into slots on CD changer R41 until they engage. Pointed ends of grips must face outwards.

6. Pull CD changer R41 out of mounting frame.
7. Unplug all electrical connectors at CD changer R41.
8. Fit protective cap for cable connectorVAS 6223/9(1) onto MOST bus connector (2).
9. Press release tabs on CD changer R41 and remove radio release tool T10057.
10. Plug in connectors.
11. Slide CD changer R41 into mounting frame until it engages.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing V-belt – Audi A4 B5 1.8
• Checking combination valve for secondary air system for proper operation and leakage
• Removing sump (bottom section) – Audi A6 C5
• Removing and installing intermediate flange for turbocharger
• Exploded view of front suspension