Removing and installing cable for front lid locks (left and right) — AUDI

🧭 Before you start

Fits: platform code 42

Don't miss

• Re-attach all cable ties at the same locations when re-installing.

📋 Procedure

1. Remove luggage compartment pan 70.
2. Remove headlight Electrical system94.
3. Remove respective front lid lock .
4. Cut open cable tie (3) and push foam sleeve (2) at cable mounting bracket to one side.
5. Release retaining clips (arrows) and open cover (1).

6. Take cable support brackets (1) and (6) out of cable mounting bracket (3).
7. Take cable nipple (2) for front lid lock (left-side) or cable nipple (5) for front lid lock (right-side) out of mounting bracket (4).
8. Cut open cable tie and detach cable for front lid lock. [Note: Re-attach all cable ties at the same locations when re-installing.]
9. Install front lid lock .
10. Install headlight Electrical system94.
11. Install luggage compartment pan 70.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Sealing flanges and dual-mass flywheel/drive plate - exploded view of components
• Connecting up vehicle diagnostic, testing and information system VAS 5051 A and selecting functions
• Adaption of clutch characteristic curve
• Removing and installing subframe - Audi S3
• Exploded view of wheel bearing housing components Audi A3