Removing and installing belt buckle (rear): Audi A6/A7 C7
Step-by-step removing and installing belt buckle (rear) for the Audi A6/A7 C7: 11 steps. What to remove, in what order, and what to check after.
Workshop procedure for AUDI — the exact step sequence and torque figures, straight from real workshop data.
🧭 Before you start
Fits: Audi A6/A7 C7 (4G, 2011–2018); platform code 4X
📋 Procedure
- Remove rear seat bench .
- Equipment version with belt switch: Unplug electrical connector (3) for belt switch.
- Unscrew nut (2).
- Detach centre belt end fitting (rear) (1).
- Remove belt buckle (4).
- Equipment version with belt switch: Unplug electrical connector (1) for belt switch.
- Unscrew nut (2).
- Remove belt buckle (3).
- Equipment version with belt switch: Unplug electrical connector (1) for belt switch.
- Unscrew nut (2).
- Remove belt buckle (3).
Other AUDI procedures
- Removing and installing toothed belt – Audi · 56 torque figures
- Removing engine – Audi A8 D3 · 41 torque figures
- Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
- Installing engine – Audi A8 D4 · 36 torque figures
- Removing and installing camshaft timing chain · 29 torque figures
- Connecting and disconnecting second battery A1 beneath front left seat
- Removing and installing alternator, vehicles with TSI engine
- Removing and installing oil return line for turbocharger, bi-turbo
- Removing and installing front side airbag with igniter, individual seat and double bench seat at front
- Removing and installing rear door trim, sliding door, Multivan
Who makes these pages, and how
TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.
The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.
Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.
Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com
The story behind TorqFix →Workshop data on this page last updated 20 Sep 2026.