Removing and installing backrest cover and padding - outer seat in 2nd row — AUDI

🧭 Before you start

Fits: Audi Q7 (4M, 2015–)

📋 Procedure

1. Remove padding .
2. Remove head restraint .
3. "High" seat: Remove cover (rear) .
4. Insert screwdriver (on side where button is located) between trim and head restraint guide as illustrated (arrow A) and remove trim for head restraint guide.
5. Unclip trim (1) for backrest fitting (both sides) at location shown in illustration with removal lever80-200(arrow A) and detach downwards (arrow B).

6. Disengage cover from metal hook (both sides).
7. Disengage piping (1) of cover along outside of backrest (arrow).
8. Remove side airbag (rear) .
9. Fold cover back.
10. Unplug electrical wire for seat heating and move clear.
11. Disengage padding and cover at head restraint guide and remove.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures