Removing and installing backrest cover and padding - centre seat in 2nd row — AUDI

🧭 Before you start

Fits: Audi Q7 (4M, 2015–)

📋 Procedure

1. Remove seat .
2. Attach seat to seat repair standVAS 6136.
3. Remove centre armrest .
4. Remove head restraint guide .
5. Remove centre belt end fitting (rear) .

6. Remove belt guide (centre, 2nd row) .
7. Unclip trim (1) for backrest fitting (both sides) at location shown in illustration with removal lever80-200(arrow A) and detach downwards (arrow B).
8. Disengage cover from metal hook (both sides).
9. Disengage piping (1) for cover (both sides) along outside of backrest (arrow).
10. Fold cover back.
11. Disengage piping all around armrest cut-out from wire frame (arrows).
12. Detach padding and cover.
13. Disengage padding and cover at head restraint guide and remove.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures