Removing and installing attachments - Audi RS 5: Audi A5 Cabriolet

🧭 Before you start

Fits: Audi A5 Cabriolet (8F)

Don't miss

• Diffuser trim must engage fully.

📋 Procedure

1. Remove bolts (1, 3, 4).
2. Pull off diffuser trim (2)(arrows).
3. Diffuser trim must engage fully.
4. Remove bumper cover (rear) (see the separate procedure).
5. Remove bolts (arrows).

6. Detach tailpipe trim (1) inwards from bumper cover.
7. Check distance between tailpipe trim (2) and bumper cover (1):
8. Install bumper cover (rear) (see the separate procedure).
9. Remove tailpipe trim (see the separate procedure).
10. Carefully press retaining clips (3) off guide lugs (2) using a screwdriver.
11. Detach mounting (1) from bumper cover.
12. Install tailpipe trim (see the separate procedure).

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing holder for control motor V110 and V299
• Removing and installing front seat - reclining seat – Audi
• Removing and installing exhaust manifold (rear left)
• Removing and installing intake manifold with fuel rail, cylinder bank 2 (left-side)
• Servicing gearbox cover