Removing and installing additional ATF filter on vehicles with 2.0 ltr. normally aspirated engine and 6-cyl. petrol engine — AUDI

🧭 Before you start

Fits: Audi A4 Cabriolet B6/B7 (8H), Audi A4 B6/B7 (8E)

Don't miss

• Observe rules for cleanliness when working on automatic gearbox .
• The electrical connector (3) remains in place.

📋 Procedure

1. On vehicles fitted with auxiliary heater, remove bolts (arrows) securing exhaust pipe of auxiliary heater to noise insulation.
2. Loosen bolts and release quick-fasteners (1) and (2) and take off front noise insulation. [Note: Observe rules for cleanliness when working on automatic gearbox .]
3. Place used oil collection and extraction unitV.A.G 1782 below gearbox.
4. Unscrew union nut (arrow) and disconnect ATF pipe going to additional ATF filter.
5. Disconnect air hoses (1) and (2) at secondary air pump. [Note: The electrical connector (3) remains in place.]

6. Unscrew bolts (1) on bracket for additional ATF filter (2).
7. Remove cover (1) on right side of engine compartment.
8. Remove bolts (arrows).
9. Disengage activated charcoal filter solenoid valve N80(1) at air duct.
10. Remove air duct (2).
11. Remove air cleaner housing (arrows).
12. Detach ATF pipe from top of radiator (arrow).
13. Take off additional ATF filter. [Note: Renew O-rings]
14. Checking and correcting ATF level .

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing static cornering light M51/M52, gas discharge headlights - vehicles from model year 2013 onwards
• Removing and installing exterior mirror turn signal bulb L131/L132 - vehicles up to 05.2009
• Removing and installing 4-position relay and fuse carrier with screw connection
• Removing and installing 6-position connector point, A-pillar (driver's side)
• Removing and installing poly V-belt - vehicles with electromechanical power steering