Installing repair kit for headlight range control motor: Audi A4 Cabriolet B6/B7

🧭 Before you start

Fits: Audi A4 Cabriolet B6/B7 (8H)

📋 Procedure

1. Remove headlight .
2. Cut out cover (2) along perforation using strong carpet knife (1).
3. Press ball head of actuator shaft downwards out of its mounting by tilting control motor.
4. Unplug electrical connector and detach headlight range control motor with cut-out cover.
5. Unscrew bolts and detach headlight range control motor from cover.

6. Release retaining tab (arrow) and detach housing cover from headlight housing.
7. Secure new headlight range control motor (1) with old bolts (2) to cover (4) from repair kit.
8. Connect electrical connector (3) to headlight range control motor.
9. Start by inserting ball head of actuator shaft in mounting on reflector from below; to do so, pull reflector to rear.
10. Secure cover with headlight range control motor to headlight housing using bolts (5) from repair kit.
11. Install headlight .

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Performing zero compensation of steering angle sender G85
• Vehicles with 4-cyl. engine and heater coolant shut-off valve N279
• Removing and installing electrical radiator fan V7 and radiator fan -2- V177
• Servicing accelerator mechanism - vehicles with 6-cylinder turbo engine
• Checking charge pressure sender G31 - vehicles with electronic throttle