Checking wheel bearing play, Crafter 4MOTION with Achleitner four-wheel drive — AUDI

🧭 Before you start

Fits: platform codes 2EA, 2ED, 2EH, 2EX, 2EB, 2EE, 2EK, 2FC, 2FF, 2FL, 2FZ, 2FG, 2FM

• Special tools named: dial gauge

📋 Procedure

1. Remove front wheel.
2. If fitted, remove wheel flange .
3. Remove brake caliper together with brake carrier and secure with wire so that weight of brake caliper does not stress or damage brake hose Brake systems46Brakes - mechanism.
4. Secure dial gaugeVAS 6079(2) with universal dial gauge holderVW 387(1) to wheel bearing housing.
5. Screw in a guide pin T10200(3) on the opposite side of the measuring point of universal dial gauge holderVW 387(1).

6. Screw in a commercially available bolt "“M 14 × 1.5”"(4) on opposite side of guide pin T10200(3).
7. »Tilt« wheel bearing back and forth and read wheel bearing play on universal dial gauge holderVW 387(1).
8. If the specified values are not achieved, adjust wheel bearing play .
9. Install brake caliper with brake carrier Brake systems46Brakes - mechanism.
10. If fitted, install wheel flange .
11. Install front wheel.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Replacing wheel bearing housing
• Servicing wheel bearing housing
• Removing, installing and servicing pedal cluster for vehicles with 169 kW engine
• Removing and installing strut and drive shaft
• Removing and installing front door trim (4- and 5-cylinder > 06.93)