Checking selector lever cable: Audi TT Mk1

🧭 Before you start

Fits: Audi TT Mk1 (8N)

• Renewed: cable

Don't miss

• Illustration shows version on vehicles with vehicle ID No. to 8N 41013847.
• Do not bend or kink the selector lever cable.

📋 Procedure

1. Shift selector lever into position "„P“".
2. Switch off ignition.
3. Loosen clamp (4) and detach intake hose and connector (1) from air mass meter.
4. If fitted, disconnect hose (5) from air cleaner housing.
5. Unscrew bolts (2) and (3) to remove complete air cleaner housing.

6. Push securing clip (A) upwards and detach it in (direction of arrow). [Note: Illustration shows version on vehicles with vehicle ID No. to 8N 41013847.]
7. Press selector lever cable off selector shaft lever in direction of arrow and place on top.
8. Do not loosen bolt (B).
9. Put the selector lever cable aside in such a way that the end can move freely. [Note: Do not bend or kink the selector lever cable.]
10. Move selector lever from "„P“" to "„S“".
11. Check protective sleeve on selector mechanism (on front of selector lever cable) for damage, if necessary renew cable.
12. Shift selector lever into position "„P“".
13. Carefully press selector lever cable onto selector shaft lever in opposite direction of (arrow).
14. Fit securing clip (A) and press downwards to secure.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing front door trim, Transporter
• Removing and installing backrest of 3-person bench seat, Multivan
• Removing and installing backrest cover and padding in 2nd row, Multivan/Business
• Removing and installing poly V-belt pulley with a freewheel · 1 torque figures
• Removing and installing delivery unit for reducing agent metering systemGX19