Brake system — Exploded view - brake pedal (right-hand drive vehicles) — AUDI

🧭 Before you start

Fits: Audi A6 C6 (4F, 2004–2011)

Don't miss

• The brake pedal travel must not be restricted by additional floor coverings. — Socket head bolt (1), tightening torque 9 Nm.

🔩 Torque settings

Values can differ between engine variants — check the code stamped on your block.

ℹ️ Always cross-check the exact figure against your vehicle's factory manual before final tightening — a wrong torque can damage the engine. These values are extracted from workshop data and may not cover every variant or revision.

📋 Procedure

1. ⚠ The brake pedal travel must not be restricted by additional floor coverings. — Socket head bolt (1), tightening torque 9 Nm. — 9 Nm (6.6 lb-ft)
2. Item (2) Bracket
3. Item (3) Pedal bracket
4. Socket head bolt (1), tightening torque 25 Nm — 25 Nm (18 lb-ft)
5. (2) Brake pedal (RHD)
6. (3) Pivot pin
7. (4) Pedal bracket

Other AUDI procedures

• Removing and installing toothed belt · 56 torque figures
• Removing engine · 41 torque figures
• Removing camshaft timing chain from camshafts · 38 torque figures
• Installing engine · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures