Brake system — Connecting VAS 505x and selecting functions — AUDI

🧭 Before you start

Fits: Audi A8 D3 (4E, 2002–2010)

• Special tools named: VAS 5051

📋 Procedure

1. ⚠ Test equipment must always be secured to the rear seat when road-testing the vehicle.While the vehicle is moving this equipment must be operated by a second person; NOT by the driver. — Attach the diagnosis cable connector VAS 5051/5a to the diagnosis connection.
2. Switch on the tester (arrow).
3. Switch on ignition.
4. Press the Guided Fault Finding button on the display screen.
5. Select the following:

6. Confirm the entered information.
7. Press the Go to button and select the option "“Function/component selection”".
8. Select "“Running gear”" on the display.
9. Select "“Brake system”" on the display.
10. Select "“01 - Self-diagnosis compatible systems ...”" on the display.
11. Select "“Anti-lock brake system ...”" on the display.
12. Select "“Function”" on the display.
13. Select the function you require on the display.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing power steering pump - vehicles with 8-cyl. petrol engine, biturbo
• Adjusting rear hinged doors · 3 torque figures
• Removing and installing outer constant velocity joint of drive shafts »VL100« and »VL107« · 2 torque figures
• Removing and installing steering column, right-hand drive vehicle
• Adjusting clutch engagement