Brake system — Connecting VAS 5051 B, VAS 5052 and selecting functions — AUDI
Brake system — Connecting VAS 5051 B, VAS 5052 and selecting functions on Audi: 11 steps. What to remove, in what order, and what to check after.
Workshop procedure for AUDI — the exact step sequence and torque figures, straight from real workshop data.
🧭 Before you start
Fits: Audi Q7 (4L, 2005–2015)
- Special tools named: VAS 5052
📋 Procedure
- ⚠ During a road test all test and measuring equipment must always be secured on the rear seat.While the vehicle is moving this equipment must be operated by a second person; NOT by the driver. — Plug in connector of diagnosis cableVAS 5051 B or VAS 5052 to diagnostic connection (arrow).
- Switch on tester.
- Switch on ignition.
- Touch Guided Fault Finding on the monitor or
- Touch the Guided Functions button on the display screen.
- Select the following:
- Confirm the entered information.
- Press the Go to button and select the option "“Function/component selection”".
- Select "“Running gear”" on the display.
- Select "“Brake system”" on the display.
- Select the function you require on the display.
Other AUDI procedures
- Removing and installing toothed belt – Audi · 56 torque figures
- Removing engine – Audi A8 D3 · 41 torque figures
- Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
- Installing engine – Audi A8 D4 · 36 torque figures
- Removing and installing camshaft timing chain · 29 torque figures
- Removing and installing desiccant cartridge (Denso condenser)
- Checking and modifying adapter for checking residual pressure in natural gas tank · 1 torque figures
- Renewing oil seal (right-side), Audi Q3
- Cleaning evaporator with ultrasonic A/C cleaner – Audi R8
- Removing and installing dash panel vents
Who makes these pages, and how
TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.
The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.
Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.
Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com
The story behind TorqFix →Workshop data on this page last updated 20 Sep 2026.