NSD engine — Ford 2.0 (2L)
2L · 116 hp
Engine overview
Vehicles with this engine
Factory specifications
Values from the manufacturer documentation for this engine.
Engine (general)
| Engine code | NSD |
| Capacity | 1998 cc |
| Idle speed | 875 ± 50 rpm |
| Oil pressure | 3.1/2000 bar/rpm |
Engine (petrol)
| Fuel system (make and type) | Ford SEFI |
| Number of cylinders | 4 |
| Firing order | 1-3-4-2 |
| Spark plugs (make and type) | Motorcraft AGPR22CI |
| Spark plug gap | 1.0 mm |
| CO exhaust gas | < 0.5 % |
| CO2 | 14.5 - 16.0 % |
| HC | 100 ppm |
| O2 | 0.1 - 0.5 % |
| Lambda | 0.98 - 1.02 |
| Lambda change (Delta Lambda) | 0.02 |
| Oil temperature during test | 80 °C |
| Fast-idle speed | 2800 - 3100 rpm |
| CO at fast-idle speed | < 0.3 % |
| Closed-loop test at: | 775 - 975 rpm |
Electrical
| Alternator | 90 A |
Capacities
| Engine sump, incl. filter | 4.5 l |
| Gearbox refill | 1.3 l |
| Differential | 1.3 l |
| Cooling system | 7.9 l |
| Air-conditioner refrigerant | 980 - 1020 g |
| Air-conditioner compressor oil | 160 ml |
Torque settings
| Cylinder head bolts — Stage 1 | 40 Nm |
| Cylinder head bolts — Stage 2 | 55 Nm |
| Cylinder head bolts — Stage 3 | 90° ° |
| Cylinder head bolts — Stage 4 | 90° ° |
| Renew the cylinder head bolts | 174> mm |
| Front hub | 420 Nm |
| Rear hub | 270 Nm |
| Wheel nuts | 85 Nm |
| Spark plugs | 18 Nm |
Workshop procedures for this engine
Step-by-step procedures from the workshop database.
Got a NSD problem? Ask for free.
Describe the symptoms — TorqFix replies with a diagnosis cited from verified workshop data.
Get free diagnosis →Who makes these pages, and how
TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.
The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.
Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.
Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com
The story behind TorqFix →Workshop data on this page last updated 22 Aug 2026.