TorqFix
CTHB VOLKSWAGEN Petrol 2013-now

VOLKSWAGEN CTHB — 1.4L Engine

1.4L · 170 hp

Engine overview

Manufacturer
VOLKSWAGEN
Displacement
1.4 L
Power
170 hp
Production years
2013-now
Fuel type
Petrol

Vehicles with this engine

1T 9R

Torque figures by job

From the step-by-step procedures for this engine — each figure sits in the step that uses it.

  • 20 Nm (15 lb-ft) — Tighten all bolts on the engine support T40075A to
  • 20 Nm (15 lb-ft) — Tighten all bolts on engine support T40075A to
  • 20 Nm (15 lb-ft) — Tighten all bolts on engine support T10416 to
  • 20 Nm (15 lb-ft) — Tighten all bolts on engine support T40075 to
  • 20 Nm (15 lb-ft) — Tighten all bolts on engine support T40075A to
Checking timing chain
  • 40 Nm (30 lb-ft) — Push torque wrenchVAS 6583 clockwise and keep it pushed with a torque of
  • 40 Nm (30 lb-ft) — Keep torque wrenchVAS 6583 pushed with a torque of
  • 20 Nm (15 lb-ft) — Tighten all bolts on the engine support T40075A to
  • 23 Nm (17 lb-ft) — Tighten securing bolts (arrows) to
  • 5.5 Nm (4.1 lb-ft) — ⚠ The screw-type clips on the charge air pipes must be tightened to 5
Removing and installing timing chain and chain drive for oil pump
  • 20 Nm (15 lb-ft) — Tighten new securing bolt (1) to
  • 8 Nm (5.9 lb-ft) — Position chain tensioner on oil pump drive chain and tighten securing bolt (3) to
  • 9 Nm (6.6 lb-ft) — Install chain tensioner (1) and tighten securing bolts (2) to
  • 40 Nm (30 lb-ft) — Tighten securing bolt (2) to
  • 5.5 Nm (4.1 lb-ft) — ⚠ The screw-type clips on the charge air pipes must be tightened to 5
  • 5.5 Nm (4.1 lb-ft) — ⚠ The screw-type clips on the charge air pipes must be tightened to 5

Engine codes in the same family

The same code prefix usually means the same block with a different output, fuel or model year. Procedures are often shared — check the code on the engine plate.

Workshop procedures for this engine

Step-by-step procedures from the workshop database, carrying 63 torque figures.

Got a CTHB problem? Ask for free.

Describe the symptoms — TorqFix replies with a diagnosis cited from verified workshop data.

Get free diagnosis →

Who makes these pages, and how

TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.

The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.

Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.

Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com

The story behind TorqFix →

Workshop data on this page last updated 14 Oct 2026.