CBFA engine — Audi 2.0 (2L)
2L · 200 hp
Engine overview
Vehicles with this engine
Torque figures by job
From the step-by-step procedures for this engine — each figure sits in the step that uses it.
- 20 Nm (15 lb-ft) — Attach engine bracket T10359 with bolt (1) to cylinder block (tighten to approx
- 20 Nm (15 lb-ft) — Attach engine support T10359(1) with bolt (3) to cylinder block and tighten to approx
- 20 Nm (15 lb-ft) — Attach engine support T10359(1) with bolt (3) to cylinder block and tighten to approx
- 20 Nm (15 lb-ft) — Attach engine bracket T10359 with bolt (1) to cylinder block (tighten to approx
- 20 Nm (15 lb-ft) — Attach engine support T10359(1) with bolt (3) to cylinder block and tighten to approx
- 20 Nm (15 lb-ft) — Attach engine bracket T10359 with bolt (1) to cylinder block (tighten to approx
- 20 Nm (15 lb-ft) — Attach engine bracket T10359(1) with bolt (3) to cylinder block (tighten to approx
- 8 Nm (5.9 lb-ft) — Fit cover using old bolts and tighten to
- 8 Nm (5.9 lb-ft) — Specified torque of bolts (arrows)
- 8 Nm (5.9 lb-ft) — Fit cover using old bolts and tighten to
Factory specifications
Values from the manufacturer documentation for this engine.
Emissions
| Emission code | 70/220*2006/96B |
| Emission standard | Euro 4 (02/2008 ->) |
| CO2 average | 182 g/km |
| CO | 0.424 g/km |
| HC | 0.048 g/km |
| NOx | 0.016 g/km |
| Emission code | 715/2007*692/2008F |
| Emission standard | Euro 5 (06/2009 ->) |
| CO2 average | 169 g/km |
| CO | 0.587 g/km |
| HC | 0.060 g/km |
| NOx | 0.019 g/km |
| Emission standard | Euro 4 (12/2007 ->) |
| CO2 average | 181 g/km |
| CO | 0.425 g/km |
| HC | 0.054 g/km |
| NOx | 0.017 g/km |
| Emission code | 715/2007*692/2008A |
| Emission standard | Euro 5 (11/2008 ->) |
| CO2 average | 171 g/km |
| CO | 0.312 g/km |
| HC | 0.050 g/km |
| Emission standard | Euro 5 (04/2009 ->) |
Engine codes in the same family
The same code prefix usually means the same block with a different output, fuel or model year. Procedures are often shared — check the code on the engine plate.
Workshop procedures for this engine
Step-by-step procedures from the workshop database, carrying 219 torque figures.
- Removing and installing camshaft timing chain · 29 torque figures
- Exploded view - sump/oil pump · 22 torque figures
- Removing and installing sealing flange on gearbox side – VW · 17 torque figures
- Removing and installing camshaft timing chain – VW · 17 torque figures
- Checking fuel pressure sender G247 · 19 torque figures
- Removing and installing sealing flange (gearbox end) – Audi A3 · 13 torque figures
- Removing and installing upper part of sump – VW Touareg I · 11 torque figures
- Exploded view - crankshaft · 13 torque figures
- Assembly overview - cylinder head · 13 torque figures
- Assembly overview - timing chain covers · 12 torque figures
- Removing and installing ancillary bracket – VW Jetta VI · 10 torque figures
- Measuring radial clearance of crankshaft · 10 torque figures
- Removing and installing engine mountings · 7 torque figures
- Removing and installing lower part of sump – VW Touareg I · 5 torque figures
- Renewing vacuum unit for turbocharger · 3 torque figures
- Removing and installing throttle valve module J338 · 6 torque figures
- 4-cylinder direct injection engine (1.8 ltr., 2.0 ltr. 4-valve TFSI) — Removing engine · 1 torque figures
- Removing engine, Sharan · 1 torque figures
- Removing engine, Passat, CC and Golf Cabriolet · 1 torque figures
- Removing and installing fuel tank - vehicles with front-wheel drive · 1 torque figures
- Removing and installing vacuum unit for turbocharger · 3 torque figures
- Removing and installing fuel delivery unit, fuel gauge sender · 2 torque figures
- Removing and installing vibration damper – VW Golf Cabriolet · 3 torque figures
- Removing and installing cylinder head, engine codes BYT, BPU
- Removing and installing cylinder head, engine codes BZB, CAWB, CBFA, CCTA, CDAA, CCZA
Got a CBFA problem? Ask for free.
Describe the symptoms — TorqFix replies with a diagnosis cited from verified workshop data.
Get free diagnosis →Who makes these pages, and how
TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.
The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.
Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.
Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com
The story behind TorqFix →Workshop data on this page last updated 22 Aug 2026.