B205R engine — Saab 2.0 (2L)
2L · 205 hp
Engine overview
Vehicles with this engine
Factory specifications
Values from the manufacturer documentation for this engine.
Engine (general)
| Engine code | B205R |
| Capacity | 1985 cc |
| Idle speed | 825 ± 50 rpm |
| Oil pressure | 2.5/2000 bar/rpm |
Engine (petrol)
| Fuel system (make and type) | Trionic T7 |
| Number of cylinders | 4 |
| Firing order | 1-3-4-2 |
| Timing stroboscopic (before TDC) | 10 / 825 °/rpm |
| Spark plugs (make and type) | NGK PFR 7H-10 (-> 06/2000) NGK PFR 6H-10 (06/2000 ->) |
| Spark plug gap | 0.9 - 1.0 mm |
| Injection pressure/system pressure | 3.0 ± 0.1 bar |
| CO exhaust gas | < 0.5 % |
| CO at fast-idle speed | < 0.3 % |
| Fast-idle speed | 2500 - 2800 rpm |
| Lambda | 0.97 - 1.03 |
| Oil temperature during test | 80 °C |
| Closed-loop test at: | 600 - 1200 rpm |
| Basic method (Germany only) | Nr. 9 |
Cooling system
| Cap pressure | 1.4 - 1.5 bar |
| Thermostat opens at | 89 ± 2 °C |
| Oil cooler thermostat opens at | 105 ± 2 °C |
| Stage 1/Fan 1 | 100 ± 2 °C |
| Stage 2/Fan 2 | 113 ± 2 °C |
Electrical
| Battery | 60 / 85 Ah |
| Alternator | 90 / 120 / 130 A |
Capacities
| Engine sump, incl. filter | 4.0 l |
| Manual transmission | FM57 |
| Gearbox refill | 1.9 l |
| Automatic transmission | FA44 |
| Gearbox refill | 3.3 l |
| Initial filling | 7.2 l |
| Cooling system | 8.5 l |
| Air-conditioner refrigerant | 800 g |
| Air-conditioner compressor oil | 150 ml |
Torque settings
| Cylinder head bolts — Stage 1 | 40 Nm |
| Cylinder head bolts — Stage 2 | 60 Nm |
| Cylinder head bolts — Stage 3 | 90 ° |
| Spark plugs | 28 Nm |
| Inlet manifold | 24 Nm |
| Wheel nuts | 110 Nm |
| Front hub | 170 Nm + 45° Nm |
| Rear hub | 50 Nm + 30° Nm |
Emissions
| Emission code | 70/220*1996/69 |
| Emission standard | Euro 2 (06/1999 ->) |
| CO2 average | 231 g/km |
| CO | 0.020 g/km |
| HC NOx | 0.040 g/km |
| Emission code | 70/220*1999/102 |
| Emission standard | Euro 3 (06/2000 ->) |
| CO2 average | 217 g/km |
| CO | 0.370 g/km |
| HC | 0.020 g/km |
| NOx | 0.010 g/km |
| CO2 average | 246 g/km |
| CO | 0.060 g/km |
| HC NOx | 0.010 g/km |
| CO2 average | 240 g/km |
| CO | 0.460 g/km |
| HC | 0.060 g/km |
| Emission standard | Euro 3 |
| CO2 average | 213 g/km |
| CO | 0.580 g/km |
| HC | 0.040 g/km |
| Emission code | 70/220*2001/1A |
| CO2 average | 201 g/km |
| CO | 0.700 g/km |
| NOx | 0.020 g/km |
| Emission standard | Euro 2 |
| Emission standard | Euro 2 (10/1999 ->) |
| CO2 average | 224 g/km |
| CO2 average | 216 g/km |
Workshop procedures for this engine
Step-by-step procedures from the workshop database.
Got a B205R problem? Ask for free.
Describe the symptoms — TorqFix replies with a diagnosis cited from verified workshop data.
Get free diagnosis →Who makes these pages, and how
TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.
The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.
Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.
Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com
The story behind TorqFix →Workshop data on this page last updated 22 Aug 2026.