113.962 engine — Mercedes-Benz 5.0 (5L)
5L · 296 hp
Engine overview
Vehicles with this engine
Factory specifications
Values from the manufacturer documentation for this engine.
Engine (general)
| Engine code | 113.962 |
| Capacity | 4996 cc |
| Normal | 12.0 - 14.0 bar |
| Minimum | 9.0 bar |
| Differential limit between cylinders | 1.5 bar |
| Oil pressure | > 0.7 / 700 > 3.0 / 3000 bar/rpm |
Engine (petrol)
| Fuel system (make and type) | Bosch Motronic ME 2.8 |
| Number of cylinders | 8 |
| Firing order | 1-5-4-2-6-3-7-8 |
| Injection pressure/system pressure | 3.7 - 4.1 bar |
| Spark plug gap | 0.8 mm |
| Lambda | 0.97 – 1.03 |
| CO exhaust gas | < 0.5 % |
| CO at fast-idle speed | < 0.3 % |
Capacities
| Engine sump, incl. filter | 8.0 l |
| Automatic transmission | 722.630 |
| Initial filling | 8.6 (+ 0.5) l |
| Automatic transmission | 722.901 |
| Initial filling | 9.0 l |
| Transfer box | 2.8 l |
| Differential, 4WD front | 1.4 l |
| Differential, 4WD rear | 1.8 l |
| Cooling system | 12.0 l |
| Air-conditioner refrigerant | 1050 g |
| Air-conditioner refrigerant | 1180 (HH7) g |
| Air-conditioner compressor oil | 120 ml |
Torque settings
| Cylinder head bolts — Stage 1 | 10 Nm |
| Cylinder head bolts — Stage 2 | 30 Nm |
| Cylinder head bolts — Stage 3 | 90 ° |
| Cylinder head bolts — Stage 4 | 90 ° |
| Cylinder head bolts — Stage 1 | 20 Nm |
| Oxygen sensor | 55 Nm |
| Spark plugs | 28 Nm |
| Main bearing cap — Stage 1 | 20 Nm |
| Main bearing cap — Stage 2 | 90 ° |
| Main bearing cap — Stage 1 | 30 Nm |
| Side bolt of main bearing cap | 30 Nm |
| Big-end bearing cap — Stage 1 | 5 Nm |
| Big-end bearing cap — Stage 2 | 25 Nm |
| Big-end bearing cap — Stage 3 | 90 ° |
| Automatic transmission drain plug | 20 Nm |
| Wheel bolts | 180 Nm |
| Wheel bolts | 130 Nm |
Emissions
| Emission code | 70/220*1996/69 |
| Emission standard | Euro 2 (04/1998 ->) |
| CO2 average | 400 g/km |
| CO | 0.072 - 1.044 g/km |
| HC NOx | 0.067 - 0.125 g/km |
| Emission code | 70/220*1999/102A |
| Emission standard | Euro 3 (04/2001 ->) |
| CO | 0.556 g/km |
| HC | 0.084 g/km |
| NOx | 0.056 g/km |
| Emission code | 70/220*2001/1A |
| Emission standard | Euro 3 (08/2002 ->) |
| Emission code | 70/220*2001/100A |
| Emission standard | Euro 3 (11/2002 ->) |
| Emission code | 70/220*2002/80B |
| Emission standard | Euro 4 (05/2004 ->) |
| CO2 average | 378 g/km |
| CO | 0.492 g/km |
| HC | 0.062 g/km |
| NOx | 0.055 g/km |
Workshop procedures for this engine
Step-by-step procedures from the workshop database.
Got a 113.962 problem? Ask for free.
Describe the symptoms — TorqFix replies with a diagnosis cited from verified workshop data.
Get free diagnosis →Who makes these pages, and how
TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.
The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.
Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.
Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com
The story behind TorqFix →Workshop data on this page last updated 22 Aug 2026.