Checking fuel delivery rate (engine codes CCZA, CCZB, CCZC, CCZD) — VW

🧭 Before you start

Fits: VW Tiguan I (5N, 2007–2016)

• Special tools named: VAS 5052
• Renewed: fuel delivery unit

Don't miss

• Make sure that drain tap is closed and cut-off taps are open.
• Press the remote controlV.A.G 1348/3A and slowly close shut-off tap (arrow) until a pressure of 4 bar is displayed on pressure gauge. From this point on do not move position of shut-off tap.
• Open flanges on left and right. Ensure all hose connections are fitted correctly and do not leak. Check sieve in fuel delivery unit and fuel tank for coarse soiling.

🔧 Engine codes this applies to

📋 Procedure

1. Connect vehicle diagnosis and service information systemVAS 5052 B to vehicle.
2. Select Guided functions in VAS 5052 B.
3. Carry out vehicle identification.
4. Select Engine.
5. Select Checking fuel delivery rate, quick test.

6. Follow instructions on vehicle diagnosis and service information systemVAS 5052 B.
7. ⚠ The fuel line is under pressure.Risk of injury to eyes and skin from fuel.Wear eye protection and protective clothing to avoid eye injuries and skin contact. Before loosening hose connections, wrap a cloth around the connection. Then release pressure by carefully opening the connection point. — Pull supply line (2) off right flange and catch escaping fuel with a cloth.
8. Connect pressure testerVAS 6550 to flange with adapterVAS 6550/2. Hold adapterVAS 6550/1 in a measuring container.
9. Make sure that drain tap is closed and cut-off taps are open.
10. Press the remote controlV.A.G 1348/3A and slowly close shut-off tap (arrow) until a pressure of 4 bar is displayed on pressure gauge. From this point on do not move position of shut-off tap.
11. Drain measuring container.
12. The delivery rate of the fuel pump depends on the battery voltage. Therefore also connect multimeterV.A.G 1715 to contacts (1) and (5) of adapterVAS 5565.
13. Operate remote control for 60 seconds while measuring voltage at fuel pump.
14. Compare quantity of fuel delivered with specification.
15. Check fuel lines for possible restrictions (kinks) or blockages.
16. Remove cap from fuel filler neck and repeat check. If fuel delivery rate is now reached, check fuel tank breather.
17. Open flanges on left and right. Ensure all hose connections are fitted correctly and do not leak. Check sieve in fuel delivery unit and fuel tank for coarse soiling.
18. First renew left flange with pressure limiting valve and fuel filter. Repeat delivery rate check. If fuel delivery is still insufficient, fuel pump defective, renew fuel delivery unit.

Other VW procedures

• Assembly overview - cylinder head · 13 torque figures
• Assembly overview - timing chain covers · 12 torque figures
• Removing and installing ancillary bracket – VW Jetta VI · 10 torque figures
• Measuring radial clearance of crankshaft · 10 torque figures
• Removing and installing engine mountings · 7 torque figures
• Removing engine · 41 torque figures
• Removing and installing camshaft – VW Golf Cabriolet · 47 torque figures
• Adjusting valve timing – VW Passat B5 · 83 torque figures
• Removing and installing camshafts – VW Passat B6 · 39 torque figures
• Removing and installing coolant pump · 53 torque figures