Adapting functions and components — VW

🧭 Before you start

Fits: VW Passat B5 (3B)

• Special tools named: VAS 5051

🔧 Engine codes this applies to

📋 Procedure

1. Connect vehicle diagnosis, testing and information systemVAS 5051 as follows:
2. Pull cover off in direction of arrow.
3. Connect diagnosis cableVAS 5051/5A or VAS 5051/6A to diagnosis connection.
4. Connect diagnosis cableVAS 5051/5A or VAS 5051/6A to diagnosis connection.
5. Switch on tester (arrow).

6. Switch ignition on.
7. Touch field "“Guided fault finding”" on screen.
8. Select one after the other:
9. Confirm data.
10. Press "“GoTo”" button.
11. Select "“Function/component selection”".
12. Then press "“Drive (Rep. Gr. 01;10…26; 28…39)”".
13. Select respective engine code.
14. Select respective repair group, depending on what requires testing.
15. Depending on test, select the component or functions via "“Functions”" or "“Electrical components”" on the screen.

Other VW procedures

• Removing and installing cylinder head cover (left-side) – Audi · 1 torque figures
• Removing cylinder head (right-side) – Audi A8 D2
• Checking oil pressure and oil pressure switch – Audi TT Mk1
• Removing and installing front sealing flange - "“engine generation III”" · 1 torque figures
• Removing and installing right cylinder head cover – Audi A8 D2
• Removing engine · 41 torque figures
• Removing and installing camshaft – VW Golf Cabriolet · 47 torque figures
• Adjusting valve timing – VW Passat B5 · 83 torque figures
• Removing and installing camshafts – VW Passat B6 · 39 torque figures
• Removing and installing coolant pump · 53 torque figures