Vectra B C20SEL, C22SEL, ribbed belt removal — OPEL / VAUXHALL
Vectra B C20SEL, C22SEL, ribbed belt removal on Opel / Vauxhall: 13 steps, engines C20SEL, C22SEL. What to remove, in what order, and what to check after.
Workshop procedure for OPEL / VAUXHALL — the exact step sequence and torque figures, straight from real workshop data.
🧭 Before you start
Fits: platform codes 2.0, 16V, |, 2.2
🔧 Engine codes this applies to
📋 Procedure
- All vehicles:
- Remove the air filter housing
- Vehicles with air conditioning:
- Loosen the engine support bracket bolt(s)
- Remove the engine support bolt
- Remove the engine support bracket bolt(s)
- Turn the engine support bracket sideways
- All vehicles:
- Turn the tensioner clockwise
- Use a special tool:
- Remove the drive belt
- Refit all parts in the reverse order of removal
Other OPEL / VAUXHALL procedures
- Opel VectraB timing belt replacement
- Opel Corsa C 1.2 CDTI timing chain replacement
- Opel Astra G 2.2 DTI Y22DTR timing chain replacement
- Opel VectraC, Signum 2.8 Z28NEL timing chain replacement
- Opel Astra G 2003 2.0 DTI Y20DTH timing chain replacement
- Opel Astra G X Y 20DTL 2.0 DTI X20DTL timing chain replacement
- Vectra C F40 Z20NET Gearbox
- Vectra C M32 Z22YH Gearbox
- Vectra C F40 Z28NEL Z28NET Gearbox
- Zafira B M32 Z22YH Gearbox
Who makes these pages, and how
TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.
The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.
Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.
Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com
The story behind TorqFix →Workshop data on this page last updated 20 Sep 2026.