TorqFix

Auxiliary belt replacement: Nissan Note 1.5 dCi (K9K-274, K9K-276, K9K-292, K9K-400)

Step-by-step auxiliary belt replacement for the Nissan Note 1.5 dCi: 30 steps. What to remove, in what order, and what to check after.

Workshop procedure for NISSAN — the exact step sequence and torque figures, straight from real workshop data.

30 steps 4 engine codes

🧭 Before you start

Fits: platform codes 1.5, DCI, |, 90

Don't miss

  • Ensure the belt is level with the front of the pulley

🔧 Engine codes this applies to

K9K-274K9K-276K9K-292K9K-400

📋 Procedure

  1. Remove the front right wheel
  2. Renew the tensioner
  3. Engines with mechanical tensioner:
  4. Remove the ancillary drive belt
  5. Fit the ancillary drive belt
K9K-274? Steps differ between engine variants — check this job against your exact car before you commit to it. Check my car — free →
  1. Tension the belt
  2. Use the special tool
  3. Check the tension with a tension gauge
  4. The tension is set when the tension gauge indicates a value of:
  5. Engines with automatic tensioner:
  6. Note: The belt(s) has (have) five ribs; the pulleys have six ribs
  7. Note: Ensure the belt is level with the front of the pulley
  8. Release the tensioner
  9. Turn the engine clockwise
  10. Check the drive belt tension
  11. Refit the right-hand headlight
  12. Refit the front right splash guard
  13. Refit the front right wheel
  14. Refit the engine lower cover

Other NISSAN procedures

Who makes these pages, and how

TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.

The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.

Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.

Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com

The story behind TorqFix →

Workshop data on this page last updated 20 Sep 2026.