Separating engine and gearbox - dual clutch gearbox — AUDI

🧭 Before you start

Fits: Audi TT Mk2 (8J, 2006–2014)

Don't miss

• Disregard item (1).
• Disregard items marked (2, 4 and A).

🔧 Engine codes this applies to

📐 68 workshop diagrams for BUB

Real factory drawings for this job — timing marks, bolt locations and routing. Locked in the free view.

📋 Procedure

1. Unscrew bolts (1) and (2) and remove bracket (A) for bevel box.
2. Move electrical wiring clear (arrows).
3. Detach coolant hoses from gear oil cooler and from coolant pipe going to gear oil cooler (arrows).
4. Remove bolts (1) and (2) and take off coolant pipe (A).
5. Disconnect air hose (arrow).

6. Remove bolts (3).
7. Loosen bolt (2) and remove secondary air pump with bracket. [Note: Disregard item (1).]
8. Remove double-end stud from retainer T10013; to do so, release circlip.
9. Secure retainer T10013 to gearbox lifting eye using bolt M8x40 with nut and washer (25 mm outer diameter).
10. Attach workshop hoistVAS 6100 with hook10 - 222 A /2 to retainer T10013.
11. Remove bolts (1, 3, 5, 6, 7, 8, 9, 10) securing gearbox to engine. [Note: Disregard items marked (2, 4 and A).]
12. Detach gearbox from engine.

Other AUDI procedures

• Removing and installing fuel tank (front-wheel drive, USA vehicles)
• Removing and installing oil filter bracket – VW · 3 torque figures
• Removing and installing fuel filter – Audi R8 · 1 torque figures
• Removing and installing sealing flange (pulley end) – Audi
• Removing and installing air cleaner housing – Audi A6 C5 · 1 torque figures
• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures