Renewing side light bulb - rest-of-the-world vehicles / renewing side marker light bulb - USA vehicles — AUDI

🧭 Before you start

Fits: Audi Q7 (4L, 2005–2015)

Don't miss

• Fit new bulb (12V, 5W) in bulb holder; do not touch the glass part of the bulb with bare hands.

📋 Procedure

1. Switch off ignition and take out ignition key.
2. Turn light switch to position "“0”".
3. Pull out air intake grille (1) in top section of bumper cover (arrow).
4. Pull louvre (1) for air intake grille off bumper cover outwards in sequence shown (arrows A to D).
5. Disengage air intake grille (2) at the location marked with (arrow E), swivel aside and pull out of top section of bumper cover.

6. Unscrew bolts (arrows) and remove housing (1) from bumper cover.
7. Unplug electrical connector (1).
8. Turn bulb holder (2) anti-clockwise (arrow) and pull it out of housing.
9. Screw bulb out of bulb holder.
10. Fit new bulb (12V, 5W) in bulb holder; do not touch the glass part of the bulb with bare hands.
11. Insert housing in bumper.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing fuse carrier in luggage compartment electronics box (left) · 1 torque figures
• Removing and installing prewiring for unit injectors
• Checking delivery pressure of tandem pump – Audi 2.0 TDI
• Removing central lock with switch · 1 torque figures
• Adjusting hinge fitting · 1 torque figures