Renewing 12 V socket U5 — AUDI

🧭 Before you start

Fits: platform code 42

• Special tools named: T40148, puller

Don't miss

• Release tabs (2) on puller T40148 must engage in recesses in 12 V socket (3)(arrow); for this purpose, push threaded rod (1) downwards as far as stop.

📋 Procedure

1. Release tabs (2) on puller T40148 must engage in recesses in 12 V socket (3)(arrow); for this purpose, push threaded rod (1) downwards as far as stop.
2. Open glove box lid.
3. Open cover of mounting (2) and hold in this position.
4. Insert puller T40148 into 12 V socket (3) as far as stop.
5. Turn knurled wheel (1) on puller T40148 clockwise as far as stop.

6. Remove 12 V socket from mounting.
7. Unplug electrical connector.
8. Detach support (1) from puller T40148.
9. Push piston downwards and hold in this position.
10. Turn knurled wheel (4) on puller T40148 anti-clockwise (arrow); this will open release tabs (2) on 12 V socket (3) and puller T40148 can be removed.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing selector mechanism - vehicles up to 05.99, vehicle ID No. 4B-X-130 000
• Removing and installing bottom coolant pipe - vehicles with engine code letters AVF, AWX
• Removing and installing mobile telephone operating electronics control unit J412 - Coupe (as of MY 04) · 1 torque figures
• Removing and installing telephone/navigation system loudspeaker R39 · 1 torque figures
• Removing and installing gearbox mounting - vehicles with 4-cylinder engine