Renewing 12 V socket 5U26: Audi Q7

🧭 Before you start

Fits: Audi Q7 (4L, 2005–2015)

• Special tools named: T40148, puller

Don't miss

• Release tabs (2) on puller T40148 must engage in recesses in 12 V socket 3U19(item 3)(arrow); for this purpose, push threaded rod (1) downwards as far as stop.

📋 Procedure

1. Open cover in luggage compartment side trim (right-side).
2. Unplug electrical connector.
3. Release tabs (2) on puller T40148 must engage in recesses in 12 V socket 3U19(item 3)(arrow); for this purpose, push threaded rod (1) downwards as far as stop.
4. Open cover of mounting (2) and hold in this position.
5. Insert puller T40148 into 12 V socket (3) as far as stop.

6. Turn knurled wheel (1) on puller T40148 clockwise as far as stop.
7. Take 12 V socket out of mounting.
8. Detach support (1) from puller T40148.
9. Push piston downwards and hold in this position.
10. Turn knurled wheel (4) on puller T40148 anti-clockwise (arrow); this will open release tabs (2) on 12 V socket (3) and puller T40148 can be removed.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing Valeo heat exchanger
• Removing bevel box · 1 torque figures
• Removing and installing fuel tank (petrol) – Audi A3 CPWA
• Checking fuel system pressurisation pump G6 - TDI vehicles
• Removing and installing desiccant bag/desiccant cartridge · 1 torque figures