Removing undamaged sliding window for sliding door — AUDI

🧭 Before you start

Fits: platform codes SF, SG

📋 Procedure

1. Remove lower sliding door trim General body repairs, interior70Rear door trims; Removing and installing rear door trim.
2. Open sliding door.
3. Set bladeV.A.G 1561/19 to dimension (a) = 28 mm.
4. From the outside, cut through rear section of adhesive bead (1) in window aperture using electric cutterV.A.G 1561 A(2) and cutting bladeV.A.G 1561/19 (with adjustable stop roller).
5. Close sliding door.

6. Guide cutting cord (1) towards inside on left and right sides using a trimming needle from the windscreen removal kitV.A.G 1755.
7. Place cutting cord (1) around adhesive bead.
8. Cut through adhesive bead (1) in front area using pulling handleV.A.G 1351/1(2).
9. Guide cutting cord (1) to outside on left and right sides using a trimming needle.
10. Place cutting cord (1) around adhesive bead.
11. Cut through adhesive bead with pulling handleV.A.G 1351/1.
12. Place cutting cord (1) around adhesive bead and cut sliding window free using pulling handleV.A.G 1351/1(2).

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures